Description
Depending on the size needed, the V-band clamps are designed to accommodate 4″ through 5″ sized tubing found on most blower or turbo applications. Also, it’s an extremely useful connector for race applications. First, the clamp can be quickly removed and easily re-installed. There are no hoses to “stretch” over the tubing or throttle body. The use of a V-band clamp can eliminate wasted time between rounds.
Application. Besides using a V-band as a useful connector for 4″ through 5″ tubing, they may also be used with an Accufab v-band clamp compatible throttle body.
- The 4″ clamp and ferrule may be used on an Accufab 90mm v-band clamp compatible throttle body, part number F90VB sold separately.
- The 4.5″ clamp and ferrule may be used on an Accufab 105mm v-band clamp compatible throttle body, part number F105VB sold separately.
- The 5″ clamp and ferrule may be used on an Accufab 125mm v-band clamp compatible throttle body, part number U125VB sold separately.
- Note: One of the aluminum ferrules will need to be welded to the the inlet tube going to the throttle body.
Disclaimer
Our products have been designed for off road/racing applications only. These products are not legal for use in the state of California on any pollution/control motor vehicle. These performance products are legal in California only on a racing vehicle which may never be used or driven on a public highway.
CA WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov
Reviews
There are no reviews yet